Trackless Train for Sale

Packaging for shopping mall trackless train for sale

The core packaging requirements for the shopping mall trackless Train are: Use either “bare packaging + reinforcement” or “wooden crate packaging + cushioning materials,” depending on the mode of transportation. For sea transport, the vehicle must be secured inside a standard container (20-foot or 40-foot high cube), fixed with steel brackets. The vehicle frame should be bolted to the bottom of the container, with bolt spacing ≤1.5 meters, to ensure no displacement during transportation; the wheels should be secured with wooden wedges to prevent rolling; core components (such as batteries, motors, and controllers) must be packaged separately, wrapped with foam cushioning material and waterproof packaging film to prevent collision and moisture damage; the vehicle body surface should be covered with a dustproof and waterproof cover to prevent seawater corrosion or dust contamination. For land transport, if using a flatbed truck, the vehicle must be secured with steel ropes or straps. The fixing points should be selected on the load-bearing parts of the vehicle frame to avoid damaging the body. The pre-tensioning force of the straps should be ≥50kN, with at least 4 fixing points on each side; batteries must be transported separately, and the packaging must have anti-leakage and anti-short circuit functions.
The core loading requirements for the Shopping Mall Trackless Train are: Before loading, the vehicle must be pre-treated, draining fuel (for internal combustion engine models), brake fluid, and coolant (or replacing it with antifreeze), turning off all electrical equipment, and disconnecting the battery power to prevent accidental starting during transportation; core components (such as glass and lights) must be disassembled and packaged separately to prevent breakage during transportation; during loading, ensure that the vehicle’s center of gravity is centered to avoid uneven loading causing the transport vehicle to tilt. The gap between the vehicle and the transport vehicle should be filled with cushioning materials to reduce vibration damage; the power battery must be placed vertically, avoiding inversion or compression, and the packaging should be marked with warning signs such as “Dangerous Goods,” “Upward,” and “Moisture-proof,” with clear and conspicuous markings.